30 AWG / 0.25mm Pure Nickel / NI200 (3ft / 1 Meter)

R30.00

In stock

Category:

Description

PURE NICKEL NI200 WIRE – 10 METERS PER ROLL

Pure Nickel wire for folks with a RBA that needs long non-resistance leads like a Penelope, Ody, Ithaca or any other device that requires to be built with non-resistance wire. Available in a 10 meter spool.

Note: NOT INTENDED TO BE USED AS COIL, ONLY INSULATE LEGS. (With exception to mods/devices that allow temperature control, in which it is recommended). Please be extra careful when handling wire. Due to the nature of which this material is composed of as well as its size, there can be someresidual tension and the wire can spring off the spool very quickly.

Important Notice:
Rebuildable atomizer coils and wicks have known risks. If you are new or unsure of what you are doing you can create a hazard for your devices and yourself.

Rebuildables are for experts, not average or beginner vapers with no multimeter, knowledge of how to use a meter, when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick must be tested carefully with a meter before it is used.
2. Faulty wicks/coils WILL damage (or worse) electronic devices.
3. New coil/wick units must be tested and then used first on an APV that has short circuit protection.
4. Improperly calculated coils can damage and destroy electronic devices if not properly calibrated and ohms/watts and amp draw is considered. This is a known issue.

If you purchase this item, you are doing so at your own risk.